How to Make Tube and Worm Rig: A Step-by-Step Guide
If you’re an avid angler looking to enhance your fishing experience, learning how to make a tube and worm rig is a valuable skill to acquire. This rig is particularly effective for targeting fish species like bass, and it can be easily customized to suit different fishing conditions. In this article, we will walk you through the process of making a tube and worm rig, from gathering the necessary materials to tying the rig itself.
Materials Needed
Before you begin, gather the following materials:
– A tube (preferably made of durable plastic or rubber)
– A selection of soft plastic worms
– A suitable fishing line (monofilament or fluorocarbon)
– A set of split shot weights
– A pair of needle-nose pliers
– A fishing hook (usually a size 2/0 to 4/0)
Step 1: Cut the Tube
Start by cutting the tube to the desired length. Most anglers prefer a tube that is about 6 to 8 inches long. This size allows for ample room to place the worm and weight.
Step 2: Thread the Tube
Next, thread the fishing line through the tube. You can use a simple overhand knot to secure the line to the end of the tube. Be sure to leave enough line on the end to tie a knot at the other end of the tube.
Step 3: Attach the Weight
Using your needle-nose pliers, thread the weight through the tube. The weight should be placed near the end of the tube, where the line exits. This will help keep the rig in place on the bottom.
Step 4: Tie the Hook
Now, take the remaining line from the end of the tube and tie a Palomar knot or a improved clinch knot to attach the fishing hook. Be sure to leave enough line to reach the hook’s eye.
Step 5: Attach the Worm
Finally, place your selected soft plastic worm on the hook. You can position the worm on the hook’s point or in the hook’s bend, depending on your preference. Make sure the worm is securely attached to the hook.
Step 6: Test the Rig
Before heading out to the water, test your tube and worm rig by casting it into a nearby body of water. Adjust the weight and worm position as needed to achieve the desired presentation.
Conclusion
Making a tube and worm rig is a straightforward process that can significantly improve your fishing success. By following these simple steps, you’ll be able to create a rig that is tailored to your specific fishing needs. Happy fishing!
