How to Install Leatherman Pocket Clip
Installing a Leatherman pocket clip is a straightforward process that can greatly enhance the convenience and accessibility of your multi-tool. Whether you’re a frequent user or simply looking to personalize your Leatherman, this guide will walk you through the steps to securely attach a pocket clip to your multi-tool.
Step 1: Gather the Necessary Tools
Before you begin, ensure you have the following tools and materials:
– Leatherman multi-tool
– New pocket clip
– Small flat-head screwdriver or needle-nose pliers
– Optional: leatherman pocket clip tool (if included with your purchase)
Step 2: Locate the Pocket Clip Mount
Most Leatherman multi-tools have a pocket clip mount on the backside. Look for a small, flat metal plate or clip mount, which is typically located near the hinge of the multi-tool.
Step 3: Remove the Old Pocket Clip (if applicable)
If your multi-tool already has a pocket clip attached, you’ll need to remove it before installing the new one. Use the small flat-head screwdriver or needle-nose pliers to carefully remove the screws holding the clip in place. Set the screws aside for later use.
Step 4: Align the New Pocket Clip
Position the new pocket clip over the clip mount, ensuring that the clip’s mounting holes align with the holes on the mount. The clip should fit snugly and securely over the mount.
Step 5: Secure the Pocket Clip
Take one of the screws you set aside earlier and insert it through the corresponding hole in the pocket clip and the clip mount. Tighten the screw using the flat-head screwdriver or needle-nose pliers, making sure the clip is secure and stable.
Step 6: Repeat for the Other Screw
Repeat the process for the second screw, ensuring that both screws are equally tight and that the clip is properly aligned.
Step 7: Test the Pocket Clip
Gently pull on the pocket clip to ensure it is securely attached to the multi-tool. The clip should not wobble or come loose when pressure is applied.
Step 8: Optional: Use the Leatherman Pocket Clip Tool
If your purchase included a leatherman pocket clip tool, you can use it to make the installation process even easier. This tool typically features a flat surface for gripping the clip and a screwdriver slot for inserting the screw. Simply place the clip in the tool, align the screw, and tighten it as needed.
Congratulations! You have successfully installed a Leatherman pocket clip. Now you can enjoy the convenience of quickly accessing your multi-tool while on the go.
