How to Put Pockets on a Jacket
Adding pockets to a jacket can be a simple and effective way to enhance its functionality and style. Whether you’re looking to repair a torn jacket or create a custom piece of clothing, knowing how to put pockets on a jacket is a valuable skill. In this article, we will guide you through the process of adding pockets to a jacket, step by step.
Materials Needed
Before you begin, gather the following materials:
– A jacket with a pocket placement
– Pockets (you can purchase pre-made pockets or make your own)
– Scissors
– Pins
– Thread
– Sewing needle
– Seam ripper (if you’re repairing a torn jacket)
Step 1: Plan the Pocket Placement
First, decide where you want to place the pocket on the jacket. If you’re adding a new pocket, measure the distance from the edge of the jacket to where you want the pocket to be. If you’re repairing a torn pocket, simply align the edges of the tear with the original pocket placement.
Step 2: Cut the Pocket
If you’re using pre-made pockets, cut them to the desired size. If you’re making your own pockets, follow a pattern or template to cut the fabric and interfacing. Be sure to leave enough seam allowance for stitching.
Step 3: Attach the Pocket to the Jacket
Pin the pocket to the jacket in the desired position. Make sure the edges of the pocket are aligned with the edges of the jacket. If you’re repairing a torn pocket, align the edges of the tear with the edges of the pocket.
Step 4: Sew the Pocket to the Jacket
Start by stitching the pocket to the jacket along the top edge. Use a zigzag stitch to create a sturdy seam. Then, sew the side edges of the pocket to the jacket, leaving the bottom edge open. This will allow you to turn the pocket right side out.
Step 5: Turn the Pocket Right Side Out
Use a chopstick or pencil to push the pocket through the opening in the bottom edge. Make sure the edges of the pocket are smooth and even.
Step 6: Sew the Bottom Edge of the Pocket
Sew the bottom edge of the pocket closed, using a zigzag stitch to create a clean finish. This will prevent the lining of the pocket from peeking through the edges.
Step 7: Finish the Seam
Finally, trim any excess thread and thread tails. Press the seam open and iron the pocket to create a crisp, finished look.
Conclusion
Adding pockets to a jacket is a straightforward process that can be completed with basic sewing skills. By following these steps, you can create a custom jacket that’s both stylish and functional. Whether you’re repairing a torn jacket or adding a new pocket, the process is similar and can be adapted to your specific needs. Happy sewing!
