How to Make a Fabric Pocket Tissue Holder
Are you tired of searching for tissues every time you need one? Do you want to add a touch of personal style to your home? If so, creating a fabric pocket tissue holder is the perfect solution. Not only does it provide easy access to tissues, but it also adds a decorative element to any room. In this article, we will guide you through the process of making your very own fabric pocket tissue holder.
Materials Needed:
Before you start, gather the following materials:
– Fabric (cotton or any other breathable material, 1 yard)
– Iron and ironing board
– Scissors
– Pins
– Thread and needle
– Sewing machine (optional)
– Measuring tape
– Pencil or fabric marker
– Ruler
Step 1: Measure and Cut the Fabric
First, measure and cut the fabric according to the desired size of your pocket tissue holder. A standard size is approximately 10 inches by 15 inches. Lay the fabric flat on your work surface and use the ruler and pencil or fabric marker to mark the dimensions.
Step 2: Iron the Fabric
Press the fabric with an iron to remove any wrinkles. This will make it easier to work with and ensure a neat finish.
Step 3: Fold and Pin the Fabric
Fold the fabric in half lengthwise, right sides together. Pin the edges to keep them in place. This will create the pocket for the tissues.
Step 4: Sew the Side Seams
Using a needle and thread or a sewing machine, sew the side seams of the pocket, leaving a 1/4-inch seam allowance. Backstitch at the beginning and end of the seam to secure it.
Step 5: Hem the Bottom Edge
Fold the bottom edge of the pocket up by 1/4 inch and press with an iron. Then, fold it up again by 1/4 inch and press again. Pin the hem in place and sew along the edge using a 1/4-inch seam allowance.
Step 6: Attach the Pocket to the Backing
If you want a separate backing for your fabric pocket tissue holder, cut a piece of fabric that is slightly larger than the pocket. Place the pocket on top of the backing, right sides together, and pin the edges. Sew around the top edge of the pocket, leaving the bottom edge open.
Step 7: Turn and Press
Turn the pocket tissue holder right side out, using a knitting needle or chopstick to push out the corners. Press the edges with an iron to create a crisp finish.
Step 8: Add the Tissue Pocket
Now, it’s time to add the tissue pocket. Place the tissue box inside the pocket, making sure it fits comfortably. If needed, adjust the pocket size by trimming the top edge or by adding a strip of fabric to the top of the pocket.
Step 9: Decorate Your Fabric Pocket Tissue Holder
Personalize your fabric pocket tissue holder by adding decorative elements such as fabric flowers, buttons, or patches. You can also use fabric paint or markers to create designs on the holder.
Conclusion:
Making a fabric pocket tissue holder is a simple and rewarding project that adds both functionality and style to your home. Follow these steps to create your own custom tissue holder and enjoy the convenience of having tissues within reach. Happy crafting!
